74 Solve problems
5.
Replace the system unit cover (see “Replacing the cover” in
the System Upgrade and Reference Guide).
6.
Connect system power cables and external devices.
7.
Power on the system. The system boots.
8.
Power off, unplug the system and external devices, and
remove the system unit cover.
9.
Move the jumper block to the Password Enabled jumper
pins.
10.
If you removed any expansion boards, replace them (see
“Expansion boards” in the System Upgrade and Reference
Guide).
11.
Replace the system unit cover. Connect the cables and
external devices. Power on the system.
12.
Run Setup to set a new password (go to Advanced Topics
in the NEC Help Center and select Setting Security
Features.)
Cleaning the mouse
1.
Power off the computer and unplug the mouse cable.
2.
Turn the mouse over and remove the mouse ball cover to
release the ball.
3.
Rinse off the ball with water and a mild detergent. Dry it
thoroughly.
4.
Clean the inside of the mouse cavity with a dry cotton swab.
5.
Replace the mouse ball, secure the cover, and plug the mouse
cable connector into your computer again.
Summary of Contents for PowerMate Ready ES Pro
Page 105: ...Index 4 X X2 technology 39 40 ...
