Technical Information 1-19
Speakers
The multimedia systems come with 20 watt, high-quality stereo speaker set, an AC adapter,
and connecting wires. The speaker set features a volume control, base and treble controls,
power on/off switch, power lamp, and a headphone jack. Volume is controlled from the
speaker or from the preinstalled sound system software provided with the Voyetra
application program. The speaker set connects to the speaker line out jack on the back of
the system.
Microphone
The microphone that comes with the multimedia systems allows recording of voice and
sound into computer data files. The microphone connects to the MIC jack located on the
back of the system. The microphone works in conjunction with the Voyetra application
program.
PLUG AND PLAY
The system comes with a Plug and Play BIOS which supports Plug and Play technology.
Plug and Play eliminates complicated setup procedures for installing Plug and Play
expansion boards. With Plug and Play, adding a Plug and Play expansion board is done by
turning off the system, installing the board, and turning on the system. There are no jumpers
to set and no system resource conflicts to resolve. Plug and Play automatically configures
the board.
POWER MANAGEMENT
Each system comes with the power-saving features enabled. If the keyboard, mouse, or
drives are not used after 15 minutes, the screen goes blank and the system goes into a
partial power shutdown. A blinking power lamp indicates that the system is in the power-
saving mode. As soon as activity is detected, the system resumes where it left off.
The system can be manually put into a Suspend power-saving mode by pressing the suspend
button. The Suspend mode provides the greatest power savings by putting the system in
maximum power shutdown. When the system goes into Suspend mode, it saves data and
system status and then shuts off power to all possible components. A blinking power lamp
indicates that the system is in the power-saving mode. As soon as activity is detected, the
system resumes where it left off.
The amount of inactive time is adjustable. Power management can also be disabled. Both
can be set through Setup.
