Installing System Upgrades 4-21
4.
Raise up the device bracket until it is vertical to the chassis.
5.
Remove the top screw (
B
) securing the device to the bracket.
6.
Remove the two bottom screws (
D
) securing the device to the
bracket.
Releasing the 5 1/4-inch device
A – Device Bracket
C – Device
B – Top Screw
D – Bottom Screws
7.
Lower the device bracket until it latches in place.
8.
Slide the device out of the bracket.
9.
Install a replacement device in the bracket (see “Installing a
5 1/4-inch Accessible Device” in the following section).
