PowerMate ES 5250 Series Release Notes A-5
Installing Cheyenne Backup
After installing the Cheyenne
®
Backup utility on the system and rebooting the
system, an “Unable to connect to Group” error message might be displayed.
This message indicates that a backup tape unit is not installed. Installing a tape
unit or reconfiguring the Cheyenne Backup utility removes this message.
See “Using Cheyenne Backup” for issues related to using the utility in
Windows 95.
Installing PartitionMagic
Install PartitionMagic™ files from the NEC Application and Driver CD. Select
the PartitionMagic software from the Applications tab in the Installation utility
menu. The utility loads files from the NEC Application and Driver CD to
C:\Program Files\PowerQuest\PartitionMagic4
. You can find setup and
documentation files in the following folders:
!
Btmagic
!
Diskette
!
Setup
!
Userinfo.
If the PartitionMagic setup program asks you for a serial number, enter the
following number:
PM400ENOEMCD-673785
See the documentation in the Userinfo folder for information about using
PartitionMagic, BootMagic™, and the recovery diskette program. Reading the
Userinfo files requires the Adobe
®
Acrobat Reader. The Adobe Acrobat Reader
comes on the NEC Application and Driver CD. Select the Adobe software from
the Applications tab in the Installation utility menu.
Note:
If you are installing BootMagic in a system with
the Windows NT operating system, see “Installing
BootMagic in a System with Windows NT” at the end of this
document.
Installing Internet Explorer 4.01 Add-On Components
Choosing the Installing Internet Explorer 4.01 Add-On Components option on
the NEC Application and Driver CD results in a file opening error message. Due
to the space these components require, the component files are not included on
the CD. NEC CSD recommends that you run Internet Explorer 4.01, click the
Help menu, and select Product Update. This procedure takes you to the
Microsoft Internet Explorer 4.01 website where you can install these
components.
