PowerMate ES 5250 Series Release Notes A-3
Note:
LANDesk Client Manager should be installed
before any of the applications or utilities that function in
conjunction with it. Install the Cheyenne Backup utility, the
NEC Configuration Change Notification, NEC Auto Backup
utility, and the NEC WebTelligent software after installing
LANDesk Client Manager.
!
Do not install both the NEC SNMP Agent and LANDesk Client Manager
on the same computer. The two applications are incompatible. If both
NEC SNMP Agent and LANDesk Client Manager are installed, it is not
possible to remove either application. To remove them, a full restore must
be performed after which all applications must be reinstalled.
Do not install both the NEC SNMP Agent and LANDesk
Client Manager on the same computer.
!
The installation and operation of the NEC Help Center requires the
installation of Microsoft Internet Explorer 4.01 or 5.0.
Note:
If you attempt to install the NEC Help Center
without either version of Internet Explorer on your system,
the Help Center setup program prompts you to install
Internet Explorer 4.01. The NEC Help Center is designed to
work with Internet Explorer version 4.01 or higher.
See “NEC Application and Driver CD” in Chapter 3 of the PowerMate ES 5250
Series User’s Guide for detailed information about installing applications from
the Application and Driver CD.
Installing NEC SNMP Agent
See the previous section “Installing Applications in the Correct Order” and
“NEC SNMP Agent” in Chapter 4 of the PowerMate ES 5250 Series User’s
Guide for detailed installation information.
Do not install both the NEC SNMP Agent and LANDesk
Client Manager on the same computer.
