NEC POWERMATE 2000 - 01-2001 User Manual Download Page 89

Page: 89 / 137

Adding Expansion Devices 4-13

Releasing the hard drive access panel

– Latches

– Hard Drive Access Panel

Grasp each end of the interface cable connector (

not

the cable) and

carefully unplug the cable connector from the hard drive. The
connector seats tightly on the hard drive and requires a firm pull.

To prevent damage to the hard drive interface

cable when unplugging it, pull on the cable connector, not the cable.

Use care when removing the drive to avoid damage to the interface cable.

Grasp the plastic tab attached to the hard drive and carefully pull the
drive out of the drive bay. The drive seats tightly in the bay and
requires a firm pull. Set the drive aside.

Summary of Contents for POWERMATE 2000 - 01-2001










































































































































Search results

Summary of Contents for POWERMATE 2000 - 01-2001

Reviews:

Related manuals for POWERMATE 2000 - 01-2001

Brands by name

Popular brands

NEC POWERMATE 2000 - 01-2001, User Manual

Search results

Summary of Contents for POWERMATE 2000 - 01-2001

Reviews:

Related manuals for POWERMATE 2000 - 01-2001

Brands by name

Popular brands