background image

3-24

  

Configuring the System

Boot Menu Settings

Menu Item

Settings (default is bold)

Removable Devices

Press 

Return

Operating system assigns drive letters to the
devices in this list and in the order
displayed.

Device order can be changed. Use the up or
down arrow to select a device, then press
the 

+

 or 

 key to move the device up or

down the list.

Summary Screen

Disabled

, Enabled

When Enabled, shows the system
configuration on boot up.

Exit Menu

Choose the Exit Menu by selecting Exit in the legend bar on the Main
Menu screen. Other Exit Menu options are available by selecting
submenus.  

Use the arrow keys to select one of the Exit Menu options and press 

Enter

to select a submenu. Explanations of each Exit Menu item are in the
following table.

Exit Menu Items

Menu Item

Settings (default is bold)

Exit Saving Changes

Implements the changes just made, and
exits BIOS.

Exit Discarding Changes

Exit leaving BIOS unchanged.

Load Setup Defaults

Loads default values for all BIOS setup
fields.

Discard Changes

Load previous values from BIOS for all
setup fields.

Save Changes

Saves all setup value changes to BIOS.

Summary of Contents for POWERMATE 2000 - 01-2001










































































































































Reviews: