28
2. Projecting an Image (Basic Operation)
Adjusting with the remote control
1. Hold the CTL button and press the ECO/L-SHIFT button.
The Lens Shift screen will be displayed.
2. Press the
▼▲◀
or
▶
button.
Use the
▼▲◀▶
buttons to move the projected image.
TIP:
• The diagram below shows the lens shift adjustment range for the desktop front. To raise the projection position higher than this,
use the tilt feet. (
→
page
25
)
1V
1H
0.2H
0.2H
0.55V*
0.4V
Height of projected image
Width of projected image
* The maximum adjustable range for lens shift (V) is 0.5V when the NP32ZL lens is used.