19
2. Projecting an Image (Basic Operation)
2. Press the
(POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector
will become ready to use.
TIP:
• When the message “PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD.” is displayed, it means that the [SECURITY]
feature is turned on. (
→
page
46
)
• When the ECO message is displayed, it means that [ON] is
selected for [ECO MESSAGE]. (
→
page
126
)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: When no signal is available, the NEC logo (default), blue, or
black screen will be displayed.
Performing Lens Calibration
After installation or replacement of the lens, be sure to perform
[CALIBRATION] by pressing and holding the ORIENTATION
button for at least two seconds or by holding the CTL button
and pressing the INFO/L-CALIB button on the remote control
Calibration corrects the adjustable zoom and focus range. If
calibration is not performed, you may not be able to get the
best focus and zoom even if you adjust the focus and zoom
for the lens.
• The following lenses need calibration:
NP26ZL, NP27ZL, NP28ZL, NP29ZL, NP32ZL
Standby
Blinking
Power On
Steady orange
light
Blinking blue
light
Steady blue
light
(
→
page
232
)
