NEC PG-FPL, User Manual

Page: 44 / 102

44
Chapter 3 Software Installation
Preliminary User’s Manual U17271EE1V0UM00
3.3 Confirmation of USB Driver Installation
After installing the two types of drivers, check that the drivers have been installed normally, according to
the procedure below. When using the FPL, the information to be checked here is needed.
By clicking the "Device Manager" tab, check that the drivers are installed normally.
Figure 3-37: Device Manager
For Windows 98/Me
Caution: Do not select Update and Erase when communicating with the target device.
For Windows 2000/XP
Caution: Do not perform "Hardware Modification Scan" when communicating with the target
device.
Remark: In the GUI port list box, the same communication port as COM? of USB Serial Port (COM?)
needs to be selected.
If the drivers above are not displayed, or the mark "
×
" or "!" is prefixed, refer to
Chapter 9 Troubleshooting.
Check that “USB Serial Port
(COM?)” is present
Check that “USB High Speed
Serial Converter” is present