45
5. Using On-Screen Menu
3) Press
▲ ▼
button to select rate: 4800/9600/19200/38400.
Setting
On start
Standby mode
High altitude
Key lock
Laser control
Sound
HDMI setup
Off
Normal
Off
Off
Cooling fast
60 Sec
Contrast optimization
Baud rate
Off
9600
[Laser control]
Change light source brightness according to the environment and aim your projector is operating.
1) Press
▲ ▼
button to select [Laser control] menu.
2) Press the ENTER button.
3) Press
▲ ▼
button to select [ECO mode] or [Laser adjust].
4) Press the ENTER button.
ECO mode
Normal
Normal brightness, the screen becomes brighter. Alternatively, you can adjust from
50%~100%. Default is 100%.
ECO.1/ECO.2 Lower the brightness and reduce energy consumption.
Full normal
The brightness is the same as normal mode, but it is not adjustable
Laser adjust
This function is valid only in Normal mode, and the adjustable range is 50%-100%. And the menu will turn gray on
ECO.1, ECO2 and Full normal mode.
Setting
On start
Standby mode
High altitude
Key lock
Laser control
Sound
HDMI setup
Off
Normal
Off
Off
Cooling fast
60 Sec
Contrast optimization
Baud rate
Off
9600
Setting
Laser control
ECO mode
Laser adjust
Normal
100%
NOTE:
• Laser adjust option can be chosen only in Normal mode.
