NEC PCN-1815SSQN/1Cx2, Instruction Manual, Page: 29 / 110

GWP-G22906
(11) Do not operate the transmitter with the external interlock circuit strapped. In such a
case, unexpected accident may be caused.
(12) In case that a PA is stored to the storage or is shipped back to the repair center, be sure
to remove coolant completely from the PA by using FOOT PUMP attached as a part
of accessories.
(13)
Beryllium Oxide Warning
This transmitter has used the resistors containing a beryllium oxide (BeO) substrate.
Under normal applications of these products, there is NO risk to the end user. It is
important to understand this substrate must not be sanded, scraped or tampered with.
Overexposure of beryllium dust or fumes may cause berylliosis, a serious chronic lung
disease. Product should be disposed of in accordance with local regulations.
Disposing of your used NEC product
In the European Union
EU-wide legislation as implemented in each Member State requires that used
electrical and electronic products carrying the mark (left) must be disposed of
separately from normal household waste. This includes transmitter or electrical
accessories, such as interface-connectors.
When you dispose of such products, please follow the agreements made by between
you and NEC. The mark on the electrical and electronic products only applies to the
current European Union Member States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside the
European Union, please contact your local authority and ask for the correct method of
disposal.
1 - 3