NEC PCN-1815SSQN/1Cx2, Instruction Manual, Page: 101 / 110

GWP-G22906
(2) Local control
The LOCAL control mode is used when this transmitter is operating separately from
other control systems or when there are no other control systems in use. To select
local control, set LOCAL select switch on the operation panel to “LOCAL”.
While simultaneously holding down the “CONTROL” switch.
Then push the “TX ON” witch while simultaneously holding down the “CONTROL”
switch. Thereupon, PA PSs are turned on and the TX ON indication LED glows
“Amber”. To switch off, push the “TX OFF” switch while simultaneously holding
down the “CONTROL” switch. The power is shut off.
Then, the pump operates continuously for about 40 seconds before it is shut off and
comes to a stop.
4 - 13