![background image](http://html1.mh-extra.com/html/nec/nvm-2000/nvm-2000_manual_3987105009.webp)
Installing an Expansion Drive
Install the Drive
Issue 1-0
◆
5
●
Secure the expansion drive in place with four screws. See Figure 8.
Figure 8
●
Refer to Figure 9. Using the screws you previously removed, re-attach the hard drive/
floppy drive bucket assembly to the side of the expansion hard drive. If you disconnected
the green “chassis ground” wire, re-connect it. Tighten the screw to secure in place.
Figure 9
●
Go to step 13.
cut-away
view
DT-expHD-10
Note: For clarity, power wires and
ribbon cables are not shown.
DT-expHD-8
A
B
C
All manuals and user guides at all-guides.com