Installing an Expansion Drive
Install the Drive
Issue 1-0
◆
9
17. Select one of the three
available
(extra) power supply connectors and connect the power sup-
ply to the expansion hard drive. See Figure 14.
Note:
You may find that the available (extra) power supply wires with connectors are bundled
and secured with pull-ties. If they are, carefully cut the pull-ties with a pair of diagonal
cutters.
Figure 14
18. Replace the cover of the Voice Mail cabinet and secure in place with screws retained in step 6.
19. Connect the monitor cord and the keyboard cord.
20. Connect the system power cord.
Note:
Do not turn on system power.
21. Go to
Write the Hardware Settings for the New Drive to CMOS
on the next page.
202xA18
2
0
2
x
A
2
0
From power supply
(any one of 3 connectors)
DT-expHD-15
Note: For clarity, floppy ribbon cable and
master hard drive power wires are
not shown.
All manuals and user guides at all-guides.com