16
2. Projecting an Image (Basic Operation)
Adjusting the position of a projected image (Lens shift)
CAUTION:
Perform
the
adjustment
from
behind
or
from
the
side
of
the
projector.
Adjusting
from
the
front
could
expose
your
eyes
to
strong
light
which
could
injure
them.
1.
Open
the lens shift
cover
.
NOTE:
• The dials can be turned more than one full turn, but the projection position cannot be moved more than the range indicated on the
following page. Do not force to turn the dials. Doing so may damage the dials.
• If the lens is shifted to the maximum in the diagonal direction, the edges of the screen will be dark or shaded.
• The vertical shift adjustment must be finished with an image shifted upward. If you finish the vertical shift adjustment with an image
Turn the lens shift dials clockwise or counterclockwise.
Vertical dial
Turn this clockwise or counterclockwise to adjust the projection position in the vertical direction.
Horizontal dial
Turn this clockwise or counterclockwise to adjust the projection position in the horizontal direction.
Stopper
Open with the cover’s stopper pushed forward.
• The lens shift cover cannot be removed.
2.
Upward Downward Leftward Rightward
Lens shift dial
(Vertical)
Lens shift dial
(Horizontal)
shifted down, the zoom/focus adjustments or strong shaking may cause a projected image to slightly shift down.
When adjusting the position of the lens, if you find that the
dial
does not move,
it
may have been beyond the adjustment range, do
not forcibly rotate the
dial
, otherwise there is a risk of damage. When there is a lack of image,
it
has been beyond the adjustment
range,
adjust in the
opposite direction to the range of
full
image.
•
