40
1. Before Setting Up Your Projector
Eingabe Auswahl
Die Netzanschluss Methode wird durch die Schaltung der Eingabe Auswahl festgelegt. Die Konfigurationsmöglich-
keiten sind im Folgenden aufgeführt.
Anschluss C1
Anschluss
C2
Netzkabel
• Verwenden Sie als Netzkabel ein Kabel mit einer Kabelader aus Kupfer und einem Leiterquerschnitt, der den Vor-
gaben des jeweiligen Landes entspricht (siehe folgende Abbildung).
• Verwenden Sie eine runde lötfreie Anschlussklemme mit dem UL Listing-Prüfzeichen für den an der Haupteinheit
angeschlossenen Kabelabschnitt. Verwenden Sie darüber hinaus bei der Klemmung dieser Anschlussklemme ein
Werkzeug mit dem UL Listing-Prüfzeichen.
Kompatible Kabel und lötfreie Anschlussklemmen
Die technischen Daten für die Anschlussklemmen zum Befestigen der Netzkabel sind im Folgenden aufgeführt.
Netzklemme L, N
Erdklemme G
Die Größe der zu verwendenden lötfreien Anschlussklemme und das Anzugsmoment der Schrauben hängen von der
Art des Klemmenblocks ab. Verwenden Sie das Kabel und die lötfreie Anschlussklemme, die jeweils für den entsprech-
enden Klemmenblock geeignet sind (siehe folgende Tabelle). In dieser Tabelle sind die Modellnamen der empfohlenen
lötfreien Anschlussklemmen angegeben. Verwenden Sie die angegebenen oder gleichwertige Bauteile. Wenn Sie die
empfohlenen lötfreien Anschlussklemmen nicht verwenden können, stellen Sie sicher, dass Sie Anschlussklemmen
verwenden, deren Abmessungen den Angaben in der folgenden Tabelle entsprechen.