![background image](http://html.mh-extra.com/html/nec/np-lv01bd/np-lv01bd_installation-manual_250479082.webp)
56
2. Configuring the projector’s initial settings
2-2-4. Updating the projector
Preparation:
• Obtain the latest release package and store it in a local drive on your computer.
NOTE
• Perform the update by adhering to the following warnings. If you do not adhere to these warnings, there is a risk that the projector
will no longer be able to start correctly.
• Do not turn off the main power to the projector during the update.
• Do not turn off the PC during the update. Turn power saving functions off.
• Do not disconnect the LAN cable connecting the PC and projector main unit during the update.
1. On the [MAINTENANCE]
→
[Update] screen, click the [Update] button.
The Update screen appears.
Version File Maintenance
Displays the definition file (*.npversion) that is read by DCC.
“Select New Version File” button
Sets the selected file as the new version file.
Update
Displays the screen for selecting the method for updating.
“Full-Auto”button
Begins Full-Auto Update. When the Full-Auto Update finishes, the
button changes to “Update End”. Click the “Update End” button to
finish the Full-Auto Update (shuts down the projector).
“Semiauto”button
Begins Semiauto Update. When the Semiauto Update finishes, the
button changes to “Update End”. Click the “Update End” button to
finish the Semiauto Update (shuts down the projector).