background image

Troubleshooting

No picture on screen and no sound
from speakers

No picture/No picture from AV
terminal

Picture is displayed, but no sound
from the speakers.

Picture is too light 

There are stripes on the screen or
colors fade.

Picture is too dark.

Remote control does not work.

The picture is not sharp.
The picture moves.

The picture is doubled or tripled.

The picture is spotted.

• Insert the AC power cord plug securely in AC power

outlet.

• Make sure the remote control is not in the standby

mode (The POWER/Standby indicator is red.)

• Check the brightness setting of the display.
• Lamp may have malfunction. 

• Check the sound setting.
• Make sure the sound is not muted.
• Make sure a pair of headphones is not connected.
• Make sure the connectors of the optional speaker

system are securely inserted.

• Make sure COLOR and CONTRAST settings.

• Is the unit receiving interference from other devices?

Transmission antennas of radio broadcasting stations
and transmission antennas of amateur radios and
cellular phones may also cause interference.

• Use the unit as far apart as possible from devices

that may cause possible interference.

• Make sure BRIGHTNESS setting is not set too low.
• Lamp may have malfunction. 

• Change the batteries.
• Make sure the infrared transmitter window is not

receiving strong light such as light from fluorescent
lamps.

•The reception may be weak.
• The state of the broadcast may also be bad.
• Make sure the antenna is facing the right direction.
• Make sure the outside antenna is not disconnected.

•  Make sure the antenna is facing the right direction.
• There may be reflected electric waves from 

mountains or buildings.

• There may be interference from automobiles, trains,

high voltage lines, neon lights, etc.

• There may be interference between the antenna cable

and power cable. Try positioning them further apart.

Check item

Problem

30

22

31

NEC Australia Pty. Ltd.

ABN 86 001 217 527

Home Electronics Group

NEC Service Centres

New South Wales

Sydney

184 Milperra Rd, Revesby 2212

131-632

Newcastle

120 Parry Street, Newcastle West 2302

131-632

Victoria

Melbourne Unit1/6, Garden Road, Clayton, 3168

131-632

Queensland

Brisbane

Unit 4/305 Montague Road, West End, 4101

131-632

Southport

Shop 1, 48 Ferry Road, Southport 4215

131-632

South Adelaide

Adelaide

84A Richmond Rd, Keswick, 5053

131-632

Western Australia

Perth

45 Sarich Court, Osbome Park 6017

131-632

For Service in outer areas, please contact your NEC retailer for the
address of the nearest Authorised NEC Service Centre

NEC Australia Pty. Ltd.

Home Electronics Group

244 Beecroft Road EPPING 2121

Tel:131-632

Fax:(02) 9877 2353

Summary of Contents for NLT-17WF

















Reviews: