S-26
NOTES
< Precautions for Changing the Setting of ADMIN. MANAGEMENT/REMOTE MONITOR>
If the user machine setting has been changed from “LIMITED” to “FULL” or vice versa while
RSD (Remote Setup Diagnostic) communication is established, perform the following oper-
ations:
•
Temporarily disconnect the communication and re-execute “Remote Connect.”
•
Press the “Disconnect” key to disconnect the communication.
•
The specific changes made in the setting of REMOTE MONITOR are not validated
unless the connection is made again.
< Precautions for Using the RSD (Remote Setup Diagnostic)>
•
When a connection is established with a local machine using the RSD, the following
message appears on the Display and no operations can be made from the “Control
Panel” of the local machine. Neither the PC print nor Scanner function can be accepted.
•
No connection can be made with the RSD during operation from the “Control Panel” of
the local machine. Make the connection while no operations are performed on the local
machine.
•
As is the case with the RSD, operations from the “Control Panel” of the local machine,
PC print, and Scanner function are not accepted while a connection is being established
with the local machine using the LSD (Local Setup Diagnostic) and Power Web Manage-
ment/Admin. mode.
•
As is the case with the RSD, no connection can be made with LSD and Power Web Man-
agement/Admin. mode during operation from the “Control Panel” of the local machine.
Make the connection while no operations are performed on the local machine.
4980P533AA
4980P534AA
