English-12
Installation of protector for SD memory card
1. Remove the screws for securing the protector at the
top of the slot for the SD memory card.
CAUTION:
• Do not lose the removed screws. Do not leave them
inside the device as well.
2. Insert the SD memory card into the slot for the SD
memory card.
3. Attach the protector for the SD memory card. At
this point, fit the two studs on the protector into the
square holes on the front panel of the product.
4. Securely fasten the protector with the screws.
(tightening torque 4.7N•cm - 7.3N•cm)
CAUTION:
• Do not apply a force higher than the specified force
when tightening the screws. This may result in damages
to the screw holes.
