- 31 -
BIOS 設定変更
ブートモードがレガシーBIOS モードの場合は、事前準備が完了したのちに以下の手順に従い、BIOS 設定
変更を実施してください。
1>
Fiber Channel ストレージ装置との接続・状態を確認し、本体装置の電源をオンにします。
2>
下記メッセージが表示されているときに、<Alt>と<E>もしくは<Ctrl>と<E>を同時に押して、本製品の BIOS メ
ニューを表示させます。
Emulex LightPulse FC BIOS, Version 2.12a15
Copyright (c) 1997-2014 Emulex. All rights reserved.
Press <Alt E> or <Ctrl E> to enter Emulex BIOS configuration
utility. Press <s> to skip Emulex BIOS
本製品が実装された PCI スロットの Option Rom が Enabled でないと上記メッセージが表
示されません。Option Rom を Enabled にする方法は、本体装置に付属するユーザーズガ
イドを参照してください。
本製品の BIOS メニューを表示させるとメモリを使用します。従って、お使いの環境によっ
ては、上記メッセージが表示されない場合や設定が行えない場合があります。この場合
は本体装置で不要な Option Rom を Disabled にするなどの処置を実施してください。
Option Rom を Disabled にする方法は、本体装置に付属するユーザーズガイドを参照して
ください。
重要