NEC NE3108-004, User Manual

Page: 28 / 31

- 28 -
Detach the Cable
1. Remove the cable.
Pull the cable with pressing down the latch of the cable.
Important
n Attach the dust cover to the slot.
8. Network Cables
“NE3108-005 Optical Module for 10GBASE SR” has an optical fiber interface based on IEEE802.3ae
10Gigabit Ethernet® standard. The 10GbE SR standard enables 10GbE and full duplex
transmissions at distances up to 300 meters using standard multi-mode fiber (MMF, 850nm wave
length) cabling.
Supported MMF cable listed below:
Connector type: LC
core/clad diameter Modal bandwidth Type Cable length
50/125μm 400MHz*km OM-2
2
～
66 m
500MHz*km OM-2
2
～
82 m
2000MHz*km OM-3
2 ～ 300 m
62.5/125μm 160MHz*km OM-1
2 ～ 26 m
200MHz*km OM-1
2
～
33 m
OM: Optical Multimode
If you need DA cable (Direct Attach; Twin-Ax), please contact to reseller or sales agents.
9. Install the Driver
To use this product, the appropriate Fibre Channel driver for your operating system must be installed.
In the case of Windows OS, please use EXPRESSBUILDER DVD that is supplied with the server to install
the driver for this product.
Moreover, please check the newest driver for NE3108-004 in this website. If you find the new driver,
please download driver module and apply it according to an attached installation manual.
URL: http://www.58support.nec.co.jp/global/download/index.html
-> "Scalable HA Server" -> "NEC Express5800/A1080a"