- 41 -
Change BIOS settings
When you have done all of above-mentioned preparations, follow the instructions below to change
this product’s BIOS settings (registering Boot device and enabling Boot BIOS).
1> Confirm that the CPU Blade system is properly connected with the Fiber Channel device. Then,
turn on the CPU Blade.
Hint
If the logo is displayed but the BIOS window is not, press <ESC> key to
display it.
2> Hold <Alt> key and press <E> key while the following message is displayed. Then, you see this
product’s BIOS menu.
!!! Emulex LightPulse x86 BIOS !!! Version 3.03a9
Copyright(c) 1997-2008 Emulex. All rights reserved.
Press <Alt E> or <Ctrl E> to enter Emulex BIOS configuration
utility. Press <S> to skip Emulex BIOS
Important
This product’s BIOS settings window consumes a lot of memories. Therefore,
depending on your environment (for example, an expansion board is consuming a
lot of memories), this window may not be displayed or you may not be able to
change the settings. In such a case, disable the extended ROM unnecessary on
CPU Blade or take other countermeasures. Refer to the CPU Blade’s User’s
Guide for how to disable the extended ROM.
3> When CPU Blade detects that <Alt> and <E> keys are pressed, you see the following messages
and the menu.
Emulex BIOS configuration utility selected
Bringing the Link up, Please wait…
Bringing the Link up, Please wait…
Emulex Light Pulse BIOS Utility, UB3.03a9
Copyright (c) 1997-2008 Emulex. All right reserved.
Emulex Adapters in the System:
1.
LPe1205-N: PCI Bus, Device, Function (30,00,00)
2.
LPe1205-N: PCI Bus, Device, Function (30,00,01)
Enter a Selection: _
Enter <x> to Exit
Hint
If the above menu is not displayed and the window has gone to the next
one, press <Alt>, <Ctrl> and <Del> keys simultaneously to reboot the CPU
Blade. Then, start the steps from the beginning.
The above message sample is just for your reference. Some of them may
be different depending on CPU Blade or its configurations.