- 28 -
10>
1(WWPN での指定)を入力してください。入力されると Boot デバイスの一覧画面が再度表示されます。リスト
の一番上にある“Primary Boot”のエントリが「Used」となっていることを確認してください。
Adapter 01: S_ID: 010400 PCI Bus, Device, Function (02,00,00)
List of Saved Boot Devices:
1. Used DID:000000 WWPN:21000000 4C123456 LUN:00 Primary Boot
2. Unused DID:000000 WWPN:00000000 00000000 LUN:00
3. Unused DID:000000 WWPN:00000000 00000000 LUN:00
4. Unused DID:000000 WWPN:00000000 00000000 LUN:00
5. Unused DID:000000 WWPN:00000000 00000000 LUN:00
6. Unused DID:000000 WWPN:00000000 00000000 LUN:00
7. Unused DID:000000 WWPN:00000000 00000000 LUN:00
8. Unused DID:000000 WWPN:00000000 00000000 LUN:00
Select a Boot Entry:_
Enter <x> to Exit <Esc> to Previous Menu
11>
<ESC>を押して、下記のメニューまで戻ってください。
Adapter 01: PCI Bus, Device, Function (02,00,00)
LPe1105-N: I/O Base: 3000 Firmware Version: ZS2.72A2
Port Name: 10000000 C92B6B74 Node Name: 20000000 C92B6B74
Topology: Auto Topology: Loop First (Default)
The BIOS for this adapter is Disabled
1. Configure Boot Devices
2. Configure This Adapter's Parameters
Enter a Selection: _
Enter <x> to Exit <d> to Default Values <Esc> to Previous Menu
12>
2 を選択し、設定画面を表示させてください。
Adapter 01: PCI Bus, Device, Function (02,00,00)
LPe1105-N: I/O Base: 3000 Firmware Version: ZS2.72A2
Port Name: 10000000 C92B6B74 Node Name: 20000000 C92B6B74
Topology: Auto Topology: Loop First (Default)
The BIOS for this adapter is Disabled
1. Enable or Disable BIOS
2. Change Default ALPA of this adapter
3. Change PLOGI Retry Timer (+Advanced )
4. Topology Selection (+Advanced )
5. Enable or Disable Spinup Delay (+Advanced )
6. Auto Scan Setting (+Advanced )
7. Enable or Disable EDD 3.0 (+Advanced )
8. Enable or Disable Start Unit Command (+Advanced )
9. Enable or Disable Environment Variable (+Advanced )
10. Enable or Disable Auto Boot Sector (+Advanced )
11. Link Speed Selection (+Advanced )
Enter a Selection: _
Enter <x> to Exit <Esc> to Previous Menu