- 46 -
Appendix B Confirm WWPN/WWNN addresses
You can confirm WWPN/WWNN addresses of this product by checking the Blade management sheet
(refer to "4-2. Label WWPN address”) or
according to the following procedure.
Confirm WWPN/WWNN at the computer boot
1> Confirm that this product is properly installed. Then, turn on the CPU Blade.
If the logo is displayed but the BIOS window is not, press <ESC> key to
display it.
2> Hold <Alt> key or <Ctrl> key and press <E> key while the following message is displayed. Then, you
see this product’s BIOS menu.
!!! Emulex LightPulse x86 BIOS !!!, Version 3.03a9
Copyright (c) 1997-2008 Emulex. All right reserved.
Press <Alt E> or <Ctrl E> to enter Emulex BIOS configuration
Utility. Press <s> to Skip Emulex BIOS
Without enable the Option Rom of Mezzanine slot which installed this product, this
message is not displayed. Refer to the CPU Blade’s User’s Guide for how to
enable the Option Rom of Mezzanine slot.
This product’s BIOS menu consumes a lot of memories. Therefore, depending on
your environment (for example, an expansion board is consuming a lot of
memories), this message may not be displayed or you may not be able to change
the settings. In such a case, disable the Option Rom unnecessary on computer or
take other countermeasures. Refer to the CPU Blade’s User’s Guide for how to
disable the Option Rom.
3> When the computer detects that <Alt> and <E> keys are pressed, you see the following messages
and the menu.
Emulex BIOS configuration utility selected
Bring the Link up, Please wait…
Bring the Link up, Please wait…
Tips
Notice