8
FOR PROPER OPERATION
To operate the Built-in LTO correctly, observe the following points.
For considerations on handling the data cartridge, refer to the chapter "Data Cartridge".
Do not turn off the server when the LED on the front of the Built-in LTO is blinking.
This may cause a machine failure or damage of backup data.
Do not store the Built-in LTO in a place subject to corrosive gas, chemicals, or
splash of chemicals.
Built-in LTO parts may be deformed or damaged and may not be able to
operate correctly.
Do not store the Built-in LTO in a place subject to strong vibrations.
This may cause the Built-in LTO to be defected.
As the data cartridge set in the Built-in LTO, use our "Data Cartridge."
If you use a data cartridge of other manufacturer, a read/write error may
occur.
Any data cartridge cannot be used as the system disk.
This may cause the OS to be started unsuccessfully and/or the data in the
data cartridge to be broken.
Do not disassemble data cartridges.
This may cause the data stored in the data cartridge to be broken. Inserting a
data cartridge having been disassembled into the Built-in LTO may cause the
Built-in LTO to be defected.
Do not bring a substance which generates magnetism close to data cartridges.
This cause the data stored in the data cartridges may be broken.
Eject the data cartridge when you are done performing a backup.
This may shorten the operational life of the data cartridge and/or case
malfunctions.
