manualshive.com logo in svg

NEC N8120-011F, User Manual, Page: 161 / 166

Share
Download
NEC N8120-011F User Manual Download Page 161

Appendix A

Wireless LAN Specification List

IEEE802.11a

Item

Specification

Conforming standard

IEEE802.11a

Communication modes

54/48/36/24/18/12/9/6 (Mbps mode)*1

Modulation method

OFDM mode

Wireless channels

36ch, 40ch, 44ch, 48ch, 52ch, 56ch, 60ch, 64ch, 100ch, 104ch, 108ch,
112ch, 116ch, 120ch, 124ch, 128ch, 132ch, 136ch, 140ch (passive
scanning)*2

Frequency band

5GHz band (5.15 to 5.35GHz, 5.47 to 5.725GHz)

*1:

These communication modes are based on the theoretical communication rate in the standard
and thus do not match effective rates. Such factors as connected devices, radiowave
environment, surrounding obstacles, installation environment, usage status and used OS,
applications and software may affect communication rate and distance.

*2:

It may take much time to connect US40a to a passive scanning channel.

IEEE802.11b/g

Item

Specification

Conforming standard

IEEE802.11g, IEEE802.11b

Communication mode

IEEE802.11g mode: 54/48/36/24/18/12/9/6 (Mbps mode)*1
IEEE802.11b mode: 11/5.5/2/1 (Mbps mode)*1

Modulation method

OFDM method (in 54/48/36/24/18/12/9/6 Mbps modes)
DS-SS method (in 11/5.5/2/1 Mbps modes)

Wireless channels

1 to 11ch (active scanning)
12ch, 13ch (passive scanning)*2

Frequency band

2.4GHz band (2.4 to 2.4835GHz)

*1: These communication modes are based on the theoretical communication rate in the standard

and thus do not match effective rates. Such factors as connected devices, radiowave environment,
surrounding obstacles, installation environment, usage status and used OS, applications and
software may affect communication rate and distance.

*2: It may take much time to connect US40a to a passive scanning channel.

Summary of Contents for N8120-011F







































































































































































Reviews:

No comments