134 Administrator Features
Disabling Change of Network Settings with User Account
For the factory default of US40a, you can modify network settings including IP addresses with the
User account. To make it impossible to change network settings with the User account, follow the
procedure below. The procedure should be done in the Administrator account.
1.
Log on to US40a as Administrator.
2.
Start the command prompt.
Select [Start]
→
[Run] and run "CMD.EXE".
3.
Move to "C:\NEC\Tools".
4.
Run "Network_Disable.bat".
At end of the setting change, "Done." appears.
Now network settings cannot be changed with the User account.
In this state, however, enabling or disabling the network can be selected by [Start]
→
[All
Programs]
→
[Local Area Connection].
To enable the network settings to be modified with the User account again, run Network_Enable.bat
out of "C: \US40a\Tools".
Summary of Contents for N8120-011F
Page 1: ...US40a N8120 011F User s Guide 2nd Edition March 2009 856 122300 111 01 ...
Page 21: ...Chapter 1 About US40a This chapter tells you how to install connect and shutdown US40a ...
Page 133: ...Chapter 4 Administrator Features This chapter describes the administrator features of US40a ...
Page 145: ...Administrator Features 125 NOTE Continued Found New Hardware Wizard Found New Hardware Wizard ...
