Precautions on Use – Operating this product properly-
The following precautions must be observed when using this product. Ignoring these precautions while
using this product will result in the destruction of assets (data and other devices).
Please observe the following.
Read carefully the description in this Guide to handle the product properly.
Do not drop the product. Doing so may cause malfunction and failure.
Be sure to turn off the cell phone or PHS near the product. Electric waves from such devices can cause
product to malfunction.
To avoid electric hazard and malfunction, be sure to turn off the Power switch of this product and unplug
the power cord from an outlet before carrying out the work. However, there is no need to do this if the
internal optional device is hot-swappable.
This internal optional device consists of static-sensitive electronic components. To avoid failures caused
by static electricity when installing or uninstalling the internal optional device, wear an anti-static wrist
strap on your wrist and provide earthing before carrying out the work. And also connect a wrist strap to
earth ground when you wear a wrist strap.
Handling of cables
When connecting a cable (e.g., LAN cable), static electricity may also be charged due to friction against
the floor. Connecting a charged cable with an I/O device may cause damage to the devices. It is
recommended to discharge static electricity before connecting a cable by using neutralization apparatus
and so on.
If you feel difficult to install this product in PCI slot of the server, remove it once, then install it again.
Applying excess force may damage the board.