- 44 -
5-4.Using SCSI
Select
Settings
To select an option, use the arrow keys to move the cursor to the option, then press <Enter> key.
In some cases, selecting an option displays another menu. You can return to the previous menu at
any time by pressing <Esc> key.
Tips
To restore the original SCSI
Select
default values, press <F6> form the
“Configure/View SCSI Controller Settings” menu.
Configure/View SCSI Controller Settings
Various settings for this product can be changed using “Configure/View Host Adapter Settings”
.
Option
Available Settings
Default Value
SCSI Bus Interface Definitions:
SCSI Controller ID
0 - 15
7
SCSI Controller Parity
Enabled,
Disabled
Enabled
SCSI Controller Termination
Automatic, Disabled Automatic
Additional Options:
Boot Device Configuration:
Select Master SCSI Controller
29320LPE
29320LPE
SCSI Device Configuration:
Sync Transfer Rate (MB/sec)
320, 160, 80.0, 66.6,
40.0, 33.3, 20.0, 10.0,
ASYN
320
Paketized Yes,
No
Yes
QAS Yes,
No
Yes
Initiate Wide Negotiation
Yes, No
Yes
Enable Disconnection
Yes, No
Yes
Send Start Unit Command
Yes, No
Yes
BIOS Multiple LUN Support
Yes, No
No
Include in BIOS Scan
Yes, No
Yes
Advanced Configuration:
Reset SCSI Bus at IC Initialization
Enabled, Disabled
Enabled
Display <Ctrl><A> Message During BIOS Initialization
Enabled, Disabled
Enabled
Extended INT 13 Translation for DOS Drivers > 1 Gbyte
Enabled, Disabled
Enabled
POST Display Mode
Verbose, Silent,
Diagnostic
Verbose
SCSI Controller Int 13 Support
Enabled,
Disabled:NOT scan,
Disabled:scan bus
Enabled
Domain Validation
Enabled, Disabled
Enabled
Support Removable Disks Under Int 13 as Fixed Disks
Boot Only,
All Disks,
Disabled
Disalbed
BIOS Support for Bootable CD-ROM
Enabled, Disabled
Enabled
