- 41 -
5.SCSI BIOS - SCSI
Select
-
The SCSI
Select
utility software is used for setting this product. To start the utility, no special startup
disk is required. It can be started by a simple keyboard operation while the self-diagnosis program
POST is running.
Notice
This product is delivered with the latest version of SCSI
Select
utility.
Therefore, the settings windows may be different from those in this
document. In such a case, contact your sales agent for details.
5-1.About SCSI
Select
SCSI
Select
are used in the following case.
When you set the transfer rate to the value that the SCSI device requires.
Check
Steps
1. Start
SCSI
Select
.
2. Select Configure/View Host Adapter Setting.
3. Select SCSI Device Configuration.
4. Change Sync Transfer Rate (MB/Sec) from “160” to the value that the SCSI
device requires.
5. Save changes and exit SCSI
Select
.
When you don
’
t boot up a system from the SCSI device.
Check
Steps
1. Start
SCSI
Select
.
2. Select Configure/View Host Adapter Setting.
3. Select
Advanced
Configuration
Options.
4. Change SCSI Controller Int 13 Support from “Enabled” to “Disabled:scan”.
5. Save changes and exit SCSI
Select
.
