- 40 -
4-4.SCSI Controller Configurations
This product's configuration is optimized at factory shipment. Normally, reconfiguration is not
necessary, however, if necessary, you can reconfigure this product by using its utility.
Refer to "5.SCSI BIOS - SCSI
Select
- " for the details of the SCSI utilities.
Tips
It is necessary to change the setting of the transfer rate by using SCSISelect
according to the SCSI device. Please refer to the manual of the SCSI Device.
4-5.Installation of a SCSI driver
To use this product, the appropriate SCSI driver for your operating system must be installed. For
detailed information, refer to the “N8103-107 SCSI Controller Software User’s Guide” which is
included in “N8103-107 Windows Driver CD” as “\Manual\ENG\Setup.pdf”.
Tips
As for Linux, refer to the following URL.
- NEC Express5800 Website
http://www.nec.co.jp/express/linux/index.html
