- 34 -
5.SAS BIOS
- SAS Configuration Utility -
The SAS Configuration Utility is used for setting this product. To start the utility, no special startup
disk is required. It can be started by a simple keyboard operation while the self-diagnosis program
POST is running.
Notice
This product is delivered with the latest version of the SAS Configuration Utility.
Therefore, the settings windows may be different from those in this document. In
such a case, contact your sales agent for details.
5-1.About SAS Configuration Utility
SAS Configuration Utility is used in the following case.
After installing this product, when the system cannot be booted from USB DVD-ROM drive.
1. Start SAS Configuration Utility.
2. Select Global Properties.
3. Change "Support Interrupt" setting "Hook interrupt, the Default" to "Bypass Interrupt hook".
Pause When Boot Alert Displayed [No]
Boot Information Display Mode [Display adapters & installed devices]
Support Interrupt [Bypass interrupt hook]
Restore Defaults
4. Save changes and exit SAS Configuration Utility.
5-2.Starting SAS Configuration Utility
Follow these steps to start SAS Configuration Utility.
1. Turn on the computer.
The following message will be displayed.
LSI Corporation MPT SAS BIOS
MPTBIOS-6.22.00.00 (2008.04.10)
Copyright 2000-2008 LSI Corporation.
Press Ctrl-C to start LSI Logic Configuration Utility...
2. Hold <Ctrl> key and press <C> key.
SAS Configuration Utility starts and the “Adapter List” menu will be displayed.
