NEC N8100-958F, User Manual

Page: 249 / 346

Troubleshooting 8-31
5.
When the following message is displayed, press S .
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices.
The following message is displayed.
Please inert the disk labeled
manufacturer-supplied hardware support disk
into Drive A:
*Press ENTER when ready.
6.
Insert the Windows 2000 OEM-DISK for NEC EXPRESSBUILDER into the floppy disk
drive, and press
Enter .
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Win2000)] and press Enter .
Then, it returns to the screen of Procedure 5.
7.
If the optional board or SCSI HostRAID is installed, select the proper SCSI Adapter and
press
Enter .
– Adaptec HostRAID U320 Driver Ver 1.02 For Windows 2000/XP/2003 (When SCSI
HostRAID is installed.)
– INITIO INI-A10XU2W SCSI Host Adapter (When N8103-65F board is installed.)
– MegaRAID SCSI320-1 Controller Driver (When N8103-80F board is installed.)
– MegaRAID SCSI320-2 Controller Driver (When N8103-81F board is installed.)
– Adaptec I2O RAID Driver Disk for 32bit Windows 2000/XP/2003 (When N8103-86F
board is installed.)
8.
Press
R
to select the recovery option.
9.
Select the keyboard.
10.
If you are requested, press R to select system recovery procedure.
11.
If you are requested, select either of the procedure below:
[Manual Recovery] (Press M )
Do not select this option unless you are a high-level user or a system administrator.
If you use this option, you can recover the problems of system files, partition boot
sector, and start-up environment.
[Quick Recovery] (Press F )
This option is very easy to use and the user does not need to do anything during the
procedure. If you select this option, the system recovery disk program starts to
recover the problems concerning system files, partition boot sector of system disk,
and start-up environment (if multiple operating systems are installed on the system).