NEC N8100-958F, User Manual

Page: 121 / 346

Configuring Your Server 4-23
„
Advanced Configuration
Move the cursor onto "Advanced Configuration" and press Enter to display the submenu.
The following table lists submenu items, available parameter, and descriptions.
Submenu item Parameter Description
Reset SCSI Bus at
IC Initialization [Enabled]
Disabled Select "Enabled".
Display <Ctrl><A>
Message During
BIOS Initialization [Enabled]
Disabled Select "Enabled".
Extended Int 13
Translation for DOS
Drives > 1 GByte [Enabled]
Disabled Select "Enabled".
POST Display Mode [Verbose]
Silent
Diagnostic Select "Verbose".
SCSI Controller Int
13 Support [Enabled]
Disabled:
NOT Scan
Disabled:
scan bus Enable or disable SCSI BIOS.
Select "Enabled" for most cases other than the
following:
•
To boot the OS from a hard disk connected to
any other controller than SCSI controller. (If
the controller has no hard disks connected,
there is no problem.)
•
BIOS of the SCSI controller may be disabled to
reserve an area in the expansion ROM space
if the controller has no hard disks connected.
Domain Validation [Enabled]
Disabled Select "Enabled".
Support Removable
Disks Under Int 13
as Fixed Disks Boot Only
All Disks
[Disabled] AIC-79xx BIOS automatically controls the
removable disks.
BIOS Support for
Bootable CD-ROM [Enabled]
Disabled Select "Enabled".
[ ]: Factory-set
„
HostRAID
Move the cursor onto "HostRAID" and press
Enter
to choose the HostRAID option.
Submenu item Parameter Description
HostRAID Enabled
[Disabled]
Select "Disabled" if the onboard HostRAID
controller is not used.
[ ]: Factory-set
NOTE:
For detail explanation on the HostRAID feature, see
SCSI Select Utility User's Manual and Adaptec Storage Manager
TM
-
Browser Edition User's Guide. You may view or print the SCSI Select
Utility User's Manual and Adaptec Storage Manager TM - Browser
Edition User's Guide from the NEC EXPRESSBUILDER CD-ROM.