2. List of Windows Event Logs
Express5800/R120h-1M, R120h-2M (3rd-Gen) Maintenance Guide
126
Chapter 3 Appendix
27
i40ea Warning
HPE Ethernet 10Gb 2-port Adapter #xx
Network link is disconnected.
When installing an OS, starting system,
or applying Standard Program Package
This event does not affect system operation.
27
i40ea Warning
HPE Ethernet 10Gb Adapter #xx
Network link is disconnected.
When installing an OS, starting system,
or applying Standard Program Package
This event does not affect system operation.
46
volmgr
Error
Crash dump initialization failed!
When installing an OS
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/2756313
56
qebdrv Warning
NTPNP_PCIxxxx: RDMA has been implicitly disabled due to RDMA
interface incompatibility between NDIS Miniport (ver x.xx.xx.x) and VBD
(ver x.xx.x.x) drivers. VBD driver upgrade is required.
* The value of x varies depending on your environment.
When applying Standard Program
Package
This event does not affect system operation.
134
Microsoft-Windows-Time-
Service
Warning
NtpClient was unable to set a manual peer to use as a time source
because of a DNS resolution error on 'time.windows.com,0x9'.
NtpClient will try again in 15 minutes and double the reattempt interval
thereafter.
When installing an OS, starting system,
or applying Starter Pack
If it is not registered after connecting to the Internet, there is no problem
with system operation.
1500
SNMP Error
The SNMP Service encountered an error while accessing the registry
key
[SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfigur
ation].
When installing an OS
If this event is logged only when SNMP is enabled and does not occur
repeatedly, there is no problem with system operation. Go to the
following Microsoft website for details.
http://support.microsoft.com/kb/2002303/
7023
Service Control Manager
Error
The Network List Service terminated with the following error:
The device is not ready.
When installing an OS
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
7023
Service Control Manager
Error
The IP Helper service terminated with the following error:
The service cannot be started, either because it is disabled or because
there are no enabled devices associated with it.
When starting an OS
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
7023
Service Control Manager
Error
The
WMI Performance Adapter service terminated with the following
error: The error cannot be identified.
When starting an OS or shutting down
an OS
Ignore this error because there is no impact on the system.
7030
Service Control Manager
Error
Printer Extensions and Notifications service is marked as interactive
service. However, the system is not allowed to use interactive service.
Thus, this service might not work correctly.
When installing an OS
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
10010
Microsoft-Windows-
DistributedCOM
Error
The server {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} did not register in
DCOM within the necessary timeout period.
When installing an OS
For details, refer to the following website:
http://support.microsoft.com/kb/956479/ja
(Japanese only)
Summary of Contents for N8100-2834F
Page 137: ...MEMO...
