1. Installing Internal Optional Devices
Express5800/T110g-E User’s Guide
74
Chapter 2 Preparations
Removal
1.11.5
Remove a PCI card connected to a PCI slot by using the following procedure.
1.
See steps 1 to 3 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2.
To remove the side cover, see
Chapter 2 (1.4 Removing the Side Cover)
.
3.
See installation steps 4 and 5 in Chapter 2 (
) to close the PCI retention latch.
4.
Remove the card.
5.
Attach the blank cover, and see installation step 8 in Chapter 2 (
) to close the PCI
retention latch.
6.
Assemble the server.
7.
Turn on the server and confirm that no error messages are displayed in POST.
If an error message is displayed, take notes on the message and ask your sales representative.
Installing the N8117-01A extra RS-232C connector kit
1.11.6
Install a PCI card to connect to the PCI slot by using the following procedure. For details, refer to the
instruction manual supplied with the connector kit.
The component parts for N8117-01A are as follows:
Item no.
Item name
Specification
Amount
Remark
<1>
RS-232C connector Kit
User's Guide
856-125671-002 1
<2> RS-232C
cable
(A)
804-063264-020
1
Not available for this server
<3> RS-232C
cable
(B)
804-062746-820
1
<4>
PCI bracket (1)
243-112122-001
1
Preinstalled to cable
<5>
PCI bracket (2)
243-112122-002
1
For full height PCI
This product uses a combination of items <3> and <5>.
Follow the procedure below to install the kit.
1. See
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2.
To remove the side cover, see
Chapter 2 (1.4 Removing the Side Cover)
.
3.
Assemble <3> RS-232C cable (B) and <5> PCI bracket (2).
<4>
<2>
<3>
<5>
