User Manual for NEC N5105
第
页
66
The next, select
rename
to give another name preferred to the alarm.
The last, select the option
state
menu to set the alarm on or off.
2)
Alarming
When it is up to the set alarming time, the cell phone will play the alarm prompt sound (if the
setting allows ) and show on the screen the alarm prompt picture.
If your phone is switched off, the alarm will still work and ring on time. You can press any key to mute it.
Press function right or Power key to pop up to notice user to power on or not;
Now, press
Confirm
(Function left) to power on the device, press
Cancel
,(Function right to remain off)
It is noted that the alarming will still work per previous time setting even the date and time of cell phone are
readjusted. Therefore, the next alarming date and time shall be re-determined subject to the changed date and
time in the cell phone.
12.3.4 Scheduler
1)
Function description
Under the personal information management box, the following four functions are available: calendar, task
arrangement, schedule list and capacity inquiry.
Within calendar
，
user may read &check information for current month, specify the date for check &reading,
and perform management on event, including: add to &delete recorded event, change the prompt content as
well as the date and time correspond to recorded event.
Under task arrangement, sixty events may be recorded.
The capacity inquiry provided in personal information management is for user’s purpose to check the
total/available space for recorded event &task arrangement.
2)
Calendar
The monthly calendar for current date will be shown after entering the Calendar
，
then select the date
preferred by shifting square icons with the key
U
,
D
,
L
,
R
, and the Gregorian calendar year &month are
specified for the calendar on display at the right upper corner of screen. Besides, any date with event record
under the Calendar will be shown in red
（
yet dates without events will be in black
）
.
Press the key
menu
to activate it
，
which covers
：
select date, add scheduler, scheduler list and storage state.
3)
Select date
Using this function, select any day (within valid time limit) and complete other functions.
After the first access, the current date is shown; upon the selection of any other day, the calendar returned to
by pressing the key
confirm or OK
displays that calendar the date selected belongs to.
And the calendar returned to by the key
return
shall be the one before entering “select date ”
（
note
：
subject to your date operation, it may not be the calendar for current day
）
.
4)
Add scheduler
The adding of scheduler requires information relevant to this event, and then the date &time for reminding
purpose must be set up.
