User Manual for NEC N5105
第
页
24
2
Dial and answer telephone
After the mobile phone is set, you can dial or answer phone. This chapter will provide with all basic
information needed by you.
Note
：
When dialing and receiving call, the phone searches matched name in the phone book, for the phone
number, it only judges whether the last 11 numbers of the number is same, for other number, it only judges
whether the last 7 numbers of the number is same.
2.1 Turn on and turn off phone
1.
Hold down
Pwr
key to turn on phone, the starting animated picture appear.
2.
If requiring to input PIN code, please refer to 1.2.3 chapter.
3.
In the power on state, Hold down
Pwr
key to turn off phone.
2.2 Making
call
When the mark for network operator appears in the display screen, then phone enter the idle screen, you can
dial or answer calls. The information bar at the left and top corner of screen displays network signal intensity
(four signal bars mean the strongest signal). The barrier has great influence on the communication quality, so
if moving in a small range, the signal intensity can be enhanced remarkably.
The number can be dialed by multiple dialing modes from the idle screen, including: direct dialing, phone
book dialing, rapid dialing and SIM card position dialing.
2.2.1 Direct
dialing
Dial domestic phone
The simplest method to dial is to use digital key to input the phone number (if dialing domestic long-
distance number, please add region number), then press
Snd
key and start call. When dialing, the
display screen will display name and telephone number, after the telephone is connected,
communication duration , another party’s phone number or name is displayed.
After using digital key to input telephone, please press
Menu
key to activate the menu, the following
menu items will appear in the menu.
Select
cal l
to call out telephone;
Select
IP dial
insert IP number to dial (Need to configure);
Select
save number
to save the telephone number (refer to 10.1.11 chapter for detailed operation)
Select
Countdown
to start Countdown function (refer to 11.10chapter for detailed function setting).
Select
Send SMS
to enter short message editing window and finish corresponding operation (refer to
6.2.1 chapter for operation on short message function);
Select
MMS
to start MMS function (refer to 11.10 chapter for detailed function setting).
After communication terminates, please press
Pwr
key to hang up the phone.
Dial fixed phone extension
It may be impossible to directly dial the extension of some fixed phone lines. You may need to connect the central
line before dialing the extension number. Insert “P” between the central number and the extension number, then the
handset will make the call for you. When inputing the phone number, hold down # key to enter “P”, which will be
