English-41
English
CHANGE PASSWORD
Allows the security password to be changed.
The factory preset password is [0000].
SECURITY
PASSWORD
Input security password.
SECURE MODE
OFF
The security password is not required when the monitor power is on.
START-UP LOCK
The security password is required when the monitor power is on.
CONTROL LOCK
The security password is required when a remote control button or a control button on the monitor is pressed.
BOTH LOCK
The security password is required when either the monitor is powered on, or a remote control button or a control
button on the monitor is pressed.
IR LOCK SETTINGS
Prevents the monitor from being controlled by the wireless remote control.
When [ACTIVATE] is selected, all settings are activated.
NOTE: [IR LOCK SETTINGS] is a function intended only for the wireless remote control buttons. This function
does not lock out access to the buttons on the monitor. To return to normal operation, press the “DISPLAY” button
on the remote control and hold it down for more than 5 seconds.
MODE SELECT
Selects the mode [UNLOCK], [ALL LOCK] or [CUSTOM LOCK].
UNLOCK
All buttons on the remote control are available for normal operation.
ALL LOCK
Locks all remote control buttons.
CUSTOM LOCK
Selects which buttons to be locked from POWER, VOLUME, and INPUT button.
Except for [CUSTOM LOCK] settings, other buttons on the remote control are locked.
POWER: When [LOCK] is selected, the button is locked.
VOLUME: When [UNLOCK] is selected, set the minimum and maximum volume between VOL.0 to VOL.100.
VOL + button and VOL - buttons are only available from the minimum volume to the
maximum volume you set.
When [LOCK] is selected, VOL + button and VOL - buttons are locked.
INPUT:
When [UNLOCK] is selected, choose up to three buttons from [DisplayPort1], [DisplayPort2],
[HDMI1], [HDMI2], [HDMI3], [MEDIA PLAYER], [OPTION] which you prefer to be unlocked.
The unselected buttons are locked. When [LOCK] is selected, all INPUT buttons are locked.
CHANNEL: To lock channel buttons on the remote control, select it to [LOCK] then press [ACTIVE], channel
CH/ZOOM + button and - button are locked.
KEY LOCK SETTINGS
Prevents the monitor from being controlled by the buttons on the monitor.
When [ACTIVATE] is selected all of the settings are activated.
NOTE: [KEY LOCK SETTINGS] is a function intended only for the buttons of the monitor. This function does not
lock out access to all buttons on the remote control. To activate the control key lock function, press the
p
button
and the
q
button and hold down simultaneously for more than 3 seconds. To resume user mode, press the
p
button and the
q
button and hold simultaneously for more than 3 seconds.
MODE SELECT
Selects the mode [UNLOCK], [ALL LOCK] or [CUSTOM LOCK].
UNLOCK
All buttons are available for normal operations.
ALL LOCK
Locks all remote control buttons.
CUSTOM LOCK
Selects which buttons to be locked from [POWER], [VOLUME] and [INPUT] button.
Except for [CUSTOM LOCK] settings, other buttons on the remote control are locked.
POWER: When [LOCK] is selected, the button is locked.
VOLUME: When [UNLOCK] is selected, set the minimum and maximum volume between VOL.0 to VOL.100.
The + button and the - button are only available from the minimum volume to the maximum
volume you set.
When [LOCK] is selected, the + button and the - button are locked.
INPUT:
When [UNLOCK] is selected, the INPUT/SET button is unlocked.
CHANNEL: To lock channel buttons on the remote control, select it to [LOCK] then press [ACTIVE], the
p
button
and the
q
button are locked.
DDC/CI
DisplayPort2 input only
ENABLE/DISABLE: Turns ON or OFF the two-way communication and control of the monitor.
PING
Confirm successful connection with the network by communicating with a preset IP address.
IP ADDRESS
Sets an [IP ADDRESS] for sending PING.
EXECUTE
Checks a reply can be sent to the monitor or not from the [IP ADDRESS] by sending PING.
IP ADDRESS RESET
Resets [IP ADDRESS SETTINGS] back to factory settings.
