English−87
INPUT MENU
INPUT SIGNAL INFORMATION
Shows input signal information.
CURRENT INPUT
These functions shows their current settings in the [INPUT SIGNAL INFORMATION] for the selected input
signal.
NOTE:
The functions listed here do not have settings for all input terminals available.
RESOLUTION
FREQUENCY
COLOR FORMAT
HDR EOTF
COLOR DEPTH
(SIGNAL/DISPLAY)
HDCP
VIDEO RANGE
VIDEO ID CODE
OVERSCAN
ADVANCED
INPUT SIGNAL SETTINGS
Configure settings specific to the video input terminal.
DisplayPort
DisplayPort1, DisplayPort2,
OPTION (DisplayPort)*
2
inputs only
Selects the type of DisplayPort version.
DisplayPort VERSION
The following settings can be made according to the input selection.
When receiving an 8K signal, select [1.4] for [DisplayPort1].
DisplayPort1: 1.1a, 1.2, 1.4
DisplayPort2: 1.1a, 1.2
OPTION (DisplayPort): 1.1a, 1.2
Select [SST] or [MST] when [1.2] or [1.4] is set.
NOTE:
• [MST] is available when input is DisplayPort1.
• [1.4] is available when input is DisplayPort1.
• If [1.4] is selected, the following restrictions are applied:
- Deactivates [MULTI PICTURE], [MOTION] in [SCREEN SAVER], [STILL], [POINT ZOOM],
[IMAGE FLIP], [QUICK INPUT CHANGE], [DUAL DAISY CHAIN MODE], [AUDIO INPUT],
[ROTATE], [TILE COMP], [TILE CUT] and [DP to HDMI CONVERT].
- [H MONITORS] and [V MONITORS] in [TILE MATRIX] is up to [2].
HDCP VERSION
Depending on the selection in the [DisplayPort VERSION], set items as below.
1.1a: HDCP 1.3
1.2: HDCP 1.3, HDCP 2.2
1.4: HDCP 1.3, HDCP 2.2
NOTE:
When [DisplayPort VERSION] is set [1.1a], this function is disabled.
HDR
Depending on the selection in the [DisplayPort VERSION], set items as below.
1.1a: DISABLE
1.2: ENABLE, DISABLE
1.4: ENABLE, DISABLE
NOTE:
When [DisplayPort VERSION] is set [1.1a], this function is disabled.
EQUALIZER
Compensates the video signal for better image stability.
If the image flashes or picture noise occurs, please change the setting.
HDMI
HDMI1, HDMI2, OPTION (TMDS)*
2
inputs only
Sets the HDMI mode.
HDMI MODE
Selects the type of HDMI mode (version) [MODE1] or [MODE2].
NOTE:
When this setting is changed, the OSD will be closed automatically.
HDCP VERSION
Select [HDCP 1.4] or [HDCP 2.2].
HDR
MODE1: DISABLE
MODE2: ENABLE, DISABLE
NOTE:
If [HDMI MODE] is set to [MODE1], this function is disabled.
EQUALIZER
Compensates the video signal for better image stability.
If the image flashes or picture noise occurs, please change the setting.
