NEC MultiSync C750Q User Manual Download Page 15

Page: 15 / 93

English−11

4. Connect the supplied power cord

WARNINGN:

Please refer to the

“Important Information”

section of this user’s manual for proper selection of an

AC power cord.

CAUTIONN:

Please refer to

“CAUTION 1”

NOTEN:

• The monitor should be installed close to an easily accessible power outlet.

• Please make sure that enough power is supplied to the monitor. Please refer to the “Power Supply”

in the specification (See

“C750Q” on page 67

and

“C860Q” on page 68

Clamp

Screw

5. Cable information

CAUTIONN:

Use the provided specified cables with this product so as not to interfere with radio and television reception.

For USB, please use a shielded signal cable with ferrite core.
For HDMI, RS-232C and DisplayPort, please use a shielded signal cable.
Use of other cables and adapters may cause interference with radio and television reception.

6. Turn on the power for the monitor and the external equipment

Switch on the monitor power first.

7. Operate the attached external equipment

Select the input source for the attached equipment to show the image signal on screen.

NOTEN:

Under the conditions below, DDC communication is disabled.

• Turning off the monitor’s main power.

• When [MODE] in [POWER SAVING SETTINGS] has been set to [LOW POWER] in the OSD menu, and the

monitor is turned off or shift to the power saving mode.

8. Adjust the sound

Make volume adjustments when required.

9. Adjust the picture settings (see page 75)

If necessary, make adjustments to the backlight, colors, contrast, and image position in the OSD PICTURE menu.

Summary of Contents for MultiSync C750Q






























































































Search results

Summary of Contents for MultiSync C750Q

Reviews:

Related manuals for MultiSync C750Q

Brands by name

Popular brands

NEC MultiSync C750Q, User Manual

Search results

Summary of Contents for MultiSync C750Q

Reviews:

Related manuals for MultiSync C750Q

Brands by name

Popular brands