NEC MT1065 - MultiSync XGA LCD Projector User Manual Download Page 73

Page: 73 / 94

NEC Software Utility Installation Guide

Dynamic Image Utility 2.0

Viewer PPT Converter 2.0

Image Express Utility 1.0

Contents

Be sure to read this before using the accompanying software.

(End User LIicense Agreement) ------ 1

1. Introduction ---------------------------------------------------------------- 3

• Contents of the Supplied CD-ROM ----------------------------- 3

• What Can Be Accomplished with the Supplied Software ----- 3

• Supported Projectors --------------------------------------------- 5

• Operating Environment ------------------------------------------- 5

2. Equipment Connections and Settings ---------------------------- 6

• When Using a Network Environment ---------------------------- 6

• When Making Connections with Serial Cable ------------------ 7

3. Software Installation ---------------------------------------------------- 8

• Installation ---------------------------------------------------------- 8

• Uninstalling --------------------------------------------------------- 9

4. Starting/Exiting the Software --------------------------------------- 10

• Dynamic Image Utility 2.0 -------------------------------------- 10

• Viewer PPT Converter 2.0 -------------------------------------- 11

• Image Express Utility 1.0 --------------------------------------- 12

5. Troubleshooting --------------------------------------------------------- 13

Please see the Help functions of the software
programs for information about their
functions and operation.

Summary of Contents for MT1065 - MultiSync XGA LCD Projector































































































Search results

Summary of Contents for MT1065 - MultiSync XGA LCD Projector

Reviews:

Related manuals for MT1065 - MultiSync XGA LCD Projector

Brands by name

Popular brands

NEC MT1065 - MultiSync XGA LCD Projector, User Manual

Search results

Summary of Contents for MT1065 - MultiSync XGA LCD Projector

Reviews:

Related manuals for MT1065 - MultiSync XGA LCD Projector

Brands by name

Popular brands