English-18
Tag2
SHARPNESS
This is a digital capability for keeping a crisp image at all signal timings. It continuously
adjusts to maintain as distinct or as soft image as you prefer, and is set independently
according to different timings. Press “Left” or “Right” to adjust.
RESPONSE
IMPROVE
Turns the Response Improve function on or off. Response Improve may reduce blurring
that occurs in some moving images.
ECO MODE
Decreases the amount of power consumed by reducing the brightness level.
OFF: No function.
MODE1: Decreases the brightness range up to about 160 cd/m
2
(MDview 232).
Decreases the brightness range up to about 200 cd/m
2
(MDview 243/272).
MODE2: Decreases the brightness range up to about 100 cd/m
2
.
AUTO BRIGHTNESS
Auto Brightness has three settings.
“OFF” is recommended for best color reproduction.
OFF: No function.
ON: Adjusts the brightness automatically, by detecting the brightness level of your
environment and adjusting the monitor with the best BRIGHTNESS setting*
1
.
*1: Please refer to Page 32 for full “Auto Brightness” information.
NOTE: Do not cover environmental brightness sensor (AUTO DIMMING sensor).
METAMERISM
Improves the white point color matching when the display used side-by-side with a
standard gamut display monitor. This feature compensates for the way the human eye
perceives colors slightly differently compared to the scientifi c instrument used to adjust
the display during calibration.
AMBIENT LIGHT
COMP.
Luminance setting depends on ambient light compensation.
Mostly affects black reproduction.
NOTE: AUTO DIMMING SENSOR measures ambient brightness when power is on and
affects image and color quality settings.
Note: Not recommended for use in Medical Environment, as contrast levels will change
and decrease the reproduction quality of DICOM images.
6 - AXIS ADJUST
HUE: Adjusts the hue of each color*
1
. The change in color will appear on screen and the
menu color bars will show the amount of adjustment.
SATURATION: Adjusts the color depth of each color*
1
. Press the “RIGHT” button and the
color vividness increases.
OFFSET: Adjusts the color brightness of each color*
1
. Press “RIGHT” button and the
color Brightness increases.
*1: RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA.
SHORTCUT
CUSTOM
You can select the PICTURE MODE which are displayed in PICTURE MODE shortcut
menu.
Tag3
R-H.position*
1
(Analog input only)
Adjusts the position of the red component of the image.
Press “Left” or “Right” to adjust.
G-H.position*
1
(Analog input only)
Adjusts the position of the green component of the image.
Press “Left” or “Right” to adjust.
B-H.position*
1
(Analog input only)
Adjusts the position of the blue component of the image.
Press “Left” or “Right” to adjust.
R-FINE*
1
(Analog input only)
Adjusts the “FINE” setting of the RED component of the image.
Press “Left” or “Right” to adjust.
G-FINE*
1
(Analog input only)
Adjusts the “FINE” setting of the GREEN component of the image.
Press “Left” or “Right” to adjust.
B-FINE*
1
(Analog input only)
Adjusts the “FINE” setting of the BLUE component of the image.
Press “Left” or “Right” to adjust.
R-SHARPNESS*
1
(Analog input only)
Adjusts the sharpness of the red component of the image.
Press “Left” or “Right” to adjust.
G-SHARPNESS*
1
(Analog input only)
Adjusts the sharpness of the green component of the image.
Press “Left” or “Right” to adjust.
B-SHARPNESS*
1
(Analog input only)
Adjusts the sharpness of the blue component of the image.
Press “Left” or “Right” to adjust.
DVI Long Cable
(DVI input only)
Compensates for image degradation caused by using a long DVI cable.
There are 4 possible settings, with “0” being the lowest level of compensation and “3”
being the highest level. The default setting is “1”.
*
1
MDview 232/243 only.
