background image

English-18

Advanced OSD

<How to use the advanced OSD>

•  When both OSD and Key Guide are off, push the “RESET” and “EXIT” buttons two times simultaneously.

•   You will see the Advanced OSD.

This menu is larger than the normal OSD and has a tagged structure from Tag 1 to 9.

<How to exit the advanced OSD>

•  Push the “EXIT” button.

To make an adjustment, ensure that the tag is highlighted, then press “SELECT”.

To move to another tag, press “EXIT”, then press “LEFT” or “RIGHT” to highlight another tag.

Tag1

PICTURE MODE

Selects one of two possible PICTURE MODES.

PRESET

Sets PICTURE MODE PRESET from the type of PRESET (see page 16).

LUMINANCE

Adjusts the overall image and screen background luminance. 
Press “Left” or “Right” to adjust.
When the LUMINANCE is adjusting to a new level, a numerical value will blink until the 
luminance reaches the target value.

WHITE

Adjusts the white color by temperature or xy setting. A lower color temperature will make 
the screen reddish and a higher color temperature will make the screen bluish. A stronger 
x makes the screen reddish, a stronger y makes it greenish and weak xy makes it a 
bluish white.

GAMMA

Manually select the desired Gamma* correction for the monitor. 
The LUT is calculated based on the factory calibration data or GAMMA ADJUST data for 
each individual monitor.
Six choices are available: 
DICOM, LOG LINEAR, L Star, CUSTOM, sRGB and PROGRAMMABLE.
DICOM: DICOM GSDF (Grayscale Standard Display Function).
LOG LINEAR: Luminance changes logarhythmically in response to a linear change of 
gradation.
L Star: GAMMA setting for eciRGB_v2 and Lab color space.
CUSTOM: This is displayed as numerical value which you select. The gamma value is 
selectable within a range between 1.0 and 3.0, with 0.1 intervals.
sRGB: Setting for sRGB.
PROGRAMMABLE: The Gamma correction (Display Function) can be changed by 
using the NEC Display Solutions GammaCompMD QA software. For DICOM calibration 
according to DICOM Part 14. This setting can be selected only by using the NEC Display 
Solutions software when PICTURE MODE is set to PROGRAMMABLE. Not selectable 
on the Advanced menu.
*Gamma - The way luminance is distributed across the intensity spectrum by a monitor, 
Gamma is defi ned by the relationship between the signal input voltage and the resulting 
intensity of the monitor's light output. A perfect linear device would have a Gamma of 1.0. 
A Gamma correction to DICOM Part 14 is used to alter the luminance output of a monitor 
to gray steps which appear linear to the human visual system.

CUSTOM VALUE

CUSTOM VALUE can be adjusted when CUSTOM is selected as the GAMMA setting.
The gamma value is selectable within a range between 1.0 and 3.0, with 0.1 intervals.

BLACK

Adjusts the black luminance. When the selected settings are too low to be displayed, 
the indicator on the OSD will turn magenta.

Summary of Contents for MD210C3






































Reviews: