English.7
English
On-Screen Display
Image setting
Brightness:
Adjusts the overall image and background screen brightness.
Press “+” or “-” to adjust.
Note: When backlight sensor is enabled by “Light set” selections 2 ~ 5, this function is disabled.
Contrast:
Adjusts the image brightness in relation to the background.
Press “+” or “-” to adjust.
Gamma setting
Gamma:
Allows adjustment of monitor Gamma (Grayscale tone curve).
There are six selections.
1: Gamma off
Native Gamma.
2: Gamma 1.8
Sets the Gamma value to 1.8
3: Gamma 2.0
Sets the Gamma value to 2.0
4: Gamma 2.2
Sets the Gamma value to 2.2
5: Gamma DICOM
Factory calibrated DICOM GSDF (Grayscale Standard Display Function)
is active.
6: Gamma
User
Programmable gamma curve is active for NEC GammaCompMD software
calibration.
BackLight sensor setting
Light set:
Sets the output luminance of the monitor.
Continuous brightness stabilization setting.
There are five selections.
1: Light off
No backlight stabilization.
2: Light 300
Sets brightness to 300cd/m
2
3: Light 400
Sets brightness to 400cd/m
2
(Recommended setting for optimal product lifetime and performance)
4: Light 500
Sets brightness to 500cd/m
2
5: Light 600
Sets brightness to 600cd/m
2
System Information
Sys Info:
Provides information about the current resolution and technical data.
Includes: Horizontal and Vertical frequencies, Display resolution, The name of MCU&FPGA,
MCU (Micro Controller Unit) version (Mver) and FPGA (Field Programmable Gate Array)
version (Fver)
OSD rotate & language setting
OSD Rotation:
To switch OSD between landscape and portrait mode.
1 (Normal):
Landscape mode
2 (Rotation):
Portrait mode
OSD language:
OSD control menus are available in seven languages.
Press “<“ or “>” to select.
1: English
2: Japanese
3: German
4: French
5: Italian
6: Spanish
7: Swedish
Misc
Reset All:
Selecting Reset allows you to reset all OSD control settings.
OSD Lock Out:
This control locks out access to all OSD control functions. When attempting to activate OSD controls
while in the Lock Out mode, a screen will appear indicating that the OSD controls are locked out.
To activate the OSD Lock Out function, press ENTER and hold down for at least 5 seconds.
To deactivate the OSD Lock Out function, press ENTER and hold down for at least 5 seconds while in
the OSD menu. No controls can be adjusted while in the lock out mode.
OSD Warning
No Sync:
This function gives a warning when there is no Horizontal or vertical Sync.
After power is turned on or when there is a change of input signal, the No Sync window will appear.
01_MD205MG-1_INSTALL_EN.P65
7/5/08, 10:09 AM
7
Summary of Contents for MD205MG-1 - MultiSync - 20.1" LCD Monitor
