NEC MC302X User Manual Download

Page: 51 / 146

4. Using the VIEWER

6. Move the cursor to the folder or image file with the

▲ ▼ ◀

▶

buttons and press the ENTER button.

• When a folder is selected, the file list screen for the

folder is displayed.

• If an image file is selected, the slide screen will be

displayed.

7. Move the cursor to the image file in the file list screen,

then press the ENTER button.

The slide screen will be displayed.

8. Press the

▶

button.

The next image will be projected.

9. Press the

◀

button.

The previous image will be projected.

10. Press the MENU button.

The control bar will be displayed.

• Press the MENU button while the control bar is being

displayed to display the [INPUT] screen. When you
press the MENU button again, the [INPUT] screen

disappears.

• When you press the EXIT button while the control bar

is being displayed, the control bar disappears.

Summary of Contents for MC302X



















































































































































Search results

Summary of Contents for MC302X

Reviews:

Related manuals for MC302X

Brands by name

Popular brands

NEC MC302X, User Manual

Search results

Summary of Contents for MC302X

Reviews:

Related manuals for MC302X

Brands by name

Popular brands