7. Connecting to a Network
103
Item name
Description
PJLink
Set the PJLink password.
PASSWORD
SETTINGS
Set the PJLink password.
•
Initial value: Blank
• Allowable characters: alphanumeric characters
• Number of characters: 0–32 characters
When a password is set, a number of asterisks “*” equiva-
lent to the number of characters is displayed.
ALERT MAIL
Set alert mail and perform a transmission test.
ALERT MAIL
Select whether or not to send an alert mail when an alert target
event occurs in the projector.
•
Initial value: OFF (do not transmit)
SENDER’S
ADDRESS
Set the sender’s address when sending E-mail from the
projector.
•
Initial value: Blank
• Allowable characters: alphanumeric characters, symbols
• Number of characters: 0–60 characters
SMTP SERVER
NAME
Set the SMTP server of the network to connect to the
projector.
•
Initial value: Blank
• Allowable characters: alphanumeric characters, symbols
• Number of characters: 0–60 characters
RECIPIENT’S
ADDRESS 1/2/3
Set the destination address to send E-mail from the projector
(maximum 3).
•
Initial value: Blank
• Allowable characters: alphanumeric characters, symbols
• Number of characters: 0–60 characters
TEST MAIL
Send a test mail according to the settings.
CRESTRON
Set the CRESTRON function.
Crestron Room View
Crestron Room
View
Select whether to use Crestron Room View or not.
•
Initial value: OFF (do not use)
Crestron Control
Crestron Control
Select whether to use Crestron Control or not.
•
Initial value: OFF (do not use)
IP ADDRESS
Set the Crestron Control’s IP address.
•
Initial value: 192.168.0.100
•
Allowable characters: alphanumeric, period
• Number of characters: 7–15 characters
IP ID
Set the Crestron Control’s IP ID.
•
Initial value: 5
• Allowable characters: alphanumeric
• Input character range: 3–65535
• Number of characters: 1–5 characters
