7. Connecting to a Network
102
⑤
MultiPresenter
Set the MultiPresenter operation.
Item name
Description
MODE
Select FREE mode or MANAGED mode.
When you are in the MANAGED mode, you can change the split pattern of the
screen by pressing the ENTER button on the remote control of the projector while
projecting the MultiPresenter screen.
• Initial value: FREE
NOTE:
• The mode setting is applied when all connections are cut off.
PIN TYPE
Select ONE-TIME or STATIC.
• Initial value: ONE-TIME
• A ONE-TIME PIN code will be generated automatically, so the “PIN CODE” can
-
not be entered for the next item.
• For STATIC, enter an arbitrary PIN code.
PIN CODE
Enter a PIN code for [STATIC].
• Initial value: 4-digit random number
• Allowable characters: numeral
• Number of characters: 4 characters (0000–9999)
UTILIZE PIN CODE
AS CONNECTION
PASSWORD
Select not to use the PIN code as a password (OFF), or to use the PIN code as a
password (ON).
• Initial value: ON
COMMUNICATION SPEED
LIMIT
Set the upper limit of the communication speed that MultiPresenter uses for trans-
mission.
• Initial value: DISABLE
START-UP SCREEN
GET APPS GUIDE
Select whether or not to display the Get MultiPresenter display on the start-up
screen.
• Initial value: ON (display)
CONNECTION STEP
GUIDE
Select whether or not to display the connection procedure on the start-up screen.
•
Initial value: ON (display)
CONNECTION
INFORMATION
Select whether or not to display the connection information on the start-up screen.
•
Initial value: ON (display)
MultiPresenter SCREEN
CONNECTION
INFORMATION
Select whether or not to display the connection information in the screen when
MultiPresenter is connected.
•
Initial value: ON (display)
⑥
NETWORK SERVICE
Configure the AMX BEACON, HTTP SERVER, PJLink, ALERT MAIL, CRESTRON and other settings.
Item name
Description
AMX BEACON
Select whether or not to transmit AMX beacons.
•
Initial value: OFF (do not transmit)
HTTP SERVER
Set the password to log into the projector’s HTTP server.
•
Initial value: Blank
• Allowable characters: alphanumeric symbols
• Number of characters: 0–10 characters
When a password is set, a number of asterisks “*” equivalent to the number of
characters is displayed.
